|
|
 |
Trailer
Accessories
|
|
New
trailer
accessories designed specifically for horse trailers can make your trips so
much easier!
|
|
Deluxe
Horse Trailer
Cooler |
|
Matches the BOOT BOX below!
|
Very versatile product! The outer box shell is made of
white plastic and it has a white durable
plastic liner riveted inside. The piano-hinged cover has a
foam cushion lid covered in marine-grade industrial
vinyl. The cooler comes with a 2 1/2" long drain at
the bottom of the cooler to insert through a hole
drilled in the bottom of the trailer floor for drainage.
A 1/2" inside drain plug is supplied. This cooler can also serve as a sitting
bench, boot box, or a step to get up into the gooseneck area of a
trailer. It is insulated to keep in the cold. Consider it a new and useful permanent fixture in
your tack room!
39" L x 14" W x 19 5/8" H
*3 year manufacturer's
warranty by High
Country Plastics .
+FOB:
charge in addition to regular
shipping, for a oversize or heavy box
|
|
Deluxe
Horse Trailer Cooler |
|
|
|
|
Horse
Trailer Boot Box |
|
Matches the COOLER above!
|
Very versatile product! The
box is made of molded white plastic. The
hinged cover has a foam cushion lid covered in
gray marine-grade industrial vinyl. This boot box can also serve as a sitting bench, or a step to get up into the gooseneck area of a
trailer. Consider it a new and useful permanent fixture in
your tack room!
39" L x 14" W x 19 5/8" H
*3 year manufacturer's
warranty by High
Country Plastics .
+FOB:
charge in addition to regular
flat rate shipping, for a oversize or heavy box
|
|
Horse
Trailer Boot Box |
|
|
|
|
HitchSaver |
Shown above--light silver
gray color
 |
Created
by a fellow trailer owner!
The
HitchSaver is a durable waterproof
vinyl cover designed to protect a trailer's
bumper-pull jack assembly from peeling
paint and rust that results from storing it
outdoors. Even all-aluminum trailers have
steel jacks! It comes in two sizes for an exact
fit. Features a zipper up the back and a
plastic buckle underneath to keep it fastened firmly
in place. Heavy-duty and machine
washable!
Choice of
two
colors--dark charcoal or
light silver gray.
HitchSaver Security Lock--sold
separately below.
Choice of two sizes-
Measure
from tongue to top of jack:
16" or less
= medium size
Taller
than 16" = tall size
*These are intended for
crank-type jacks only. If you have a
electric jack with a motor mounted on the
top, these sizes won't be tall enough. |
|
HitchSaver
Med Gray |
|
|
|
HitchSaver
Tall Gray |
|
|
|
HitchSaver
Med Charcoal |
|
|
|
HitchSaver
Tall Charcoal |
|
|
|
HitchSaver Security
Lock |
|
|
|
|
|
|
Full-Size Hanging
Accessory Bag
|
 |
For
trailer doors with no window or to mount in the barn. Made with canvas and heavy
netting, with 3 zippered compartments and other assorted
holders for brushes, spray, medications, first-aid kits,
etc.
Washable. Attach to trailer with 6 twist-lock fasteners
and #6 x 1/2" sheet metal screws (included).
57"H X 20"W.
*An
additional set of 6 twist-lock fasteners can be
purchased below to enable the Accessory Bag to be moved
to another location.
*the
19" mounting/trailer steps shown are
sold below.
|
|
Full-Size Hanging Accessory Bag
|
|
|
|
|
3/4 -Size Hanging
Accessory Bag
|
 |
For
trailer doors, made to fit below a window --or to mount in the barn. Made with canvas and heavy
netting, with 2
zippered compartments
and other assorted
holders for brushes, spray, medications, first-aid kits,
etc.
Washable. Attach to trailer with 6 twist-lock fasteners
and #6 x 1/2" sheet metal screws (included).
48"H X
19 1/2"W.
*An
additional set of 6 twist-lock fasteners can be
purchased below to enable the Accessory Bag to be moved
to another location.
|
|
3/4-Size Hanging Accessory Bag
|
|
|
|
|
Mini
Accessory Bag
|
 |
Designed to
hang anywhere in a trailer. Made with canvas and heavy netting.
Same as above product, but with only the bottom 2 rows
of
holders for brushes, spray, medications, first-aid kits,
etc.
Washable. Attach with 4 included
3/4" TEK screws
(coated sheet metal screws w/ large heads) to the trailer.
24" H X
19" W
|
|
Mini
Hanging Accessory Bag
|
|
|
|
|
Twist-Lock
Fasteners |
 |
Enables you to move the full-size & 3/4
size accessory
bags (with oval grommets) featured on the
Trailer Accessories
page to a second location. Also known as "turn
buttons" and commonly use to fasten canvas that has
a grommet installed.. Steel, with a polished chrome finish.
Install each with two #6 X 1/2" sheet metal screws (included).
The
oval "grommet" side of this item is not offered here.
*You get 6 fasteners & 12 screws.
|
|
Set of 6 Twist-Lock Fasteners
& 12 # 6 sheet metal/wood screws |
|
|
|
|
Heavy
Plastic Brush Box, 28" |
 |
Handy for
grooming tools in the trailer or install
one in the barn. Can hold brushes, spray,
medicine, leg wraps---even your boots.
Multiples can be installed on any flat
wall, including the interior of the
trailer door. Black heavy molded plastic.
Install with short screws or rivets along
sides & bottom. Has small pre-drilled
holes (screws & rivets
not included).
7"W X 5"T X
28"L. (actual useable inside
length: 25")
*this
product has a High Country Plastics
logo stamped into the front
*This item may be shipped by
Parcel Post, taking 5-7 days to arrive.
|
|
Heavy
Plastic Brush Box 28" |
|
|
|
|
RUMBER
Brush Box, 27" |
Made in the USA by
Rumber
Materials |
This
is a molded brush plastic box from RUMBER
Materials. Hang with a strip of screws or
rivets, mounted along the back top of the
box. This box is great for liquids in cans
or bottles, as it's heavy-duty molded one-piece
construction will not leak liquids. Can be
installed in the trailer and also in the
barn grooming area. 27"L X 7'T X 5
1/2" W
*this
product has a RUMBER logo stamped
on the front.
*This item may be shipped by
Parcel Post, taking 5-7 days to arrive.
|
|
RUMBER
Brush
Box 27" |
|
|
|
|
RUMBER
Brush Box, 17" |
Made in the USA by
Rumber
Materials |
This
is a shorter molded brush plastic box from
RUMBER Materials. Hang with a strip of
screws or rivets, mounted along the back
top of the box. This box is great for
liquids in cans or bottles, as it's
heavy-duty molded one-piece construction will not
leak. Can be installed in the trailer and
also in the barn grooming area.
*this
product has a RUMBER logo stamped
on the front.
17"L X 7"T
X 5 1/2"W.
*This item may be shipped by
Parcel Post, taking 5-7days to arrive.
|
|
RUMBER
Brush Box 17" |
|
|
|
|
Whip
Holder Bracket |
(fix2).JPG)
(fix2).JPG) |
This
plastic adjustable bracket mounts on the
trailer wall and will hold your crops and
driving whips up & out of the way.
Mounts horizontally and has 2 rows of
pre-drilled holes on the ends with 7"
between screw-centers. Great product for the barn!
|
|
Whip
Holder Bracket |
|
|
|
|
Triangle Feed Bag
(for Slant Load) |
 |
Designed to fit in
the front corner of a slant load stall. Constructed of
vinyl-backed Cordura & reinforced with 1/1/2"
nylon binding & double-sewn seams. Fastens with
three 2-sided 3 1/2" snaps (included) to rings
mounted on trailer wall &
dividers. Folds up when dividers close. Imported.
color:
Black
2
sides are 24"L x 26" along the back X 13
" deep
*A selection of D-Rings
can be found on the
Trailer Parts page.
4" double-end
snaps are sold below.
|
|
Slant
Load Triangle
Feed Bag |
|
|
|
|
Adjustable Triangle Feed Bag
|
 |
This corner
feed bag is designed to fit almost all slant-load trailers due to
the adjustable straps. They are made of a vinyl-backed
600-Denier polyester for
durability, nylon web binding and reinforced seams. This unique design has no seams on the bottom. 3 heavy snaps are included with each
bag, designed to be snapped onto D-Rings fastened to the
trailer wall.
color: black with gray
webbing
21 1/2" on two
sides X 23" along the back X 11 1/2"
inches deep w/ 14" adjustable straps
*A selection of D-Rings
can be found on the
Trailer Parts page.
4" double-end
snaps are sold below.
Made in the USA by World Class Equine
|
|
Adjustable
Triangle
Feed Bag
|
|
|
|
|
Triangle Custom-Sewn Feed Bag
|
Made in the USA by World Class Equine |
These are the feed bags
that commonly come with a brand new
horse trailer and are custom-sewn to fit
each stall in your
brand & model of trailer. They
are constructed with 14 oz. heavy vinyl,
each seam is double-sewn & reinforced
with heavy-duty webbing & each features
spurred brass grommets.. This unique design features
no seams on the bottom of the bag. They
fasten with double-sided
snaps to D-rings on your trailer (not included).
These are the most
durable feed bags on the market today.
When we receive your
order, we will call you & ask for the
measurements you want. (Measure
trailer stalls from right corner under
the window, to the D-ring on the divider, over to the front
left corner wall, along the wall under
the window, back to
the right front corner.)
*Measure carefully--custom sewn feed bags
are not returnable.
Ship time: 7-14
days after measurements are received.
A selection of D-Rings
can be found on the
Trailer Parts page.
4" double-end snaps are sold below.
|
|
Triangle Custom Feed
Bag
|
|
|
|
|
Adjustable
Rectangular Trailer Feed Bag |
Made in the USA by World Class Equine
|
These bags are designed to
go in front of a side-by-side or two horse
straight-load trailer. They are constructed of
vinyl-backed 600 Denier polyester for durability, nylon
web binding and reinforced
seams. Each feed bag measures 24" L X
18" W X 12" deep. There are four
14" adjustable straps on each corner, with
heavy-duty snaps attached.
24" L X
18" W X 12" deep
*A selection of D-Rings
can be found on the
Trailer Parts page.
*Custom-sewn
rectangular (non-adjustable) feed bags in
other sizes are available by special order below.
|
|
Adjustable
Rectangular
Trailer Feed Bag |
|
|
|
|
Adjustable
Square Trailer Feed Bag |
|
Made in the USA by World Class Equine
|
These bags are designed to
go in front of a side-by-side or two horse
straight-load trailer. They are constructed of
vinyl-backed 600 Denier polyester for durability, nylon
web binding and reinforced
seams. Each feed bag measures 24" L X
18" W X 12" deep. There are four
14" adjustable straps on each corner, with
heavy-duty snaps attached.
24" L X
24" W X 12" deep
*A selection of D-Rings
can be found on the
Trailer Parts page.
*Custom-sewn
rectangular (non-adjustable) feed bags in
other sizes are available by special order below.
|
|
Adjustable
Square
Trailer Feed Bag |
|
|
|
|
Rectangular Custom Trailer Feed Bag |
Made in the USA by World Class Equine
We keep
these in stock:
30" L X 24" W X 12" D |
These are the feed
bags that commonly come with a brand new
horse trailer and are custom-sewn to fit
each stall in your
brand & model of trailer. They
are constructed with 14 oz. heavy vinyl,
each seam is double-sewn &
reinforced with heavy-duty webbing binding
& each features spurred brass grommets.
These are the
feed bags that are fastened in front of a
side-by-side or two horse straight-load
trailer with no built-in feed manger.
They fasten with double-sided
snaps to D-rings on your trailer (not included).
These are the most
durable feed bags on the market today.
When we receive your
order, we will call you & ask for the
measurements you want (height & width)--depth
is always 12").
*Measure carefully-custom sewn feed bags
are not returnable.
Ship time: 7-14
days after measurements are received.
*A selection of D-Rings
can be found on the
Trailer Parts page.
4" double-end
snaps are sold below.
|
|
Rectangular Custom Trailer Feed Bag |
|
|
|
Double-Ended Snaps |
 |
Double-ended snaps are typically used to
fasten trailer feed bags to the trailer. If you need
small D-rings w/ mounting brackets, they are found on
the D-Ring & Tie Loop page. |
|
4 1/2" Double Ended Snap |
|
|
|
|
Snap Links |
 |
The 2" snap link
is 3/16" in diameter It's rating is
100lbs. Steel. Used in lightweight
applications, such as fastening trailer feed
bags to trailers.
The 3" snap link is
1/4" in diameter It's rating is 425 lbs.
Steel. Used in the proper capacity to fasten
chain to trailers, such as butt chains. It
also can be used for a sturdier connection
for in-trailer feed bags.
*These lengths are
approximate. These snap links are NOT rated
high enough to use with safety chains on
trailers!
|
|
Snap
Link, 2"L |
|
|
|
Snap Link, 3"L |
|
|
|
|
Hay Bale Bag, Full
Size |
Made in
the USA by World Class Equine |
Store and transport up to a 3-strand
bale of hay with no mess in the trailer
tack room or car trunk. This bag zips on
three sides like a lid, so you can fit
it over the hay bale, roll it over & zip
it up. The heavy-duty vinyl construction
with heavy-duty zipper are extremely
durable, and we think it is the
best-constructed hay bale bag available.
Also ideal for protecting a saddle, show
clothes or other horse gear. Clean with
a water hose & hang to dry.
*24"D X 17"T X 47" L
*Color choices: med.blue, hunter green, red,
grey & black
|
|
Hay Bale Bag, BLUE |
|
|
|
Hay Bale Bag, GREEN |
|
|
|
Hay Bale Bag, RED |
|
|
|
Hay Bale Bag, GREY |
|
|
|
Hay Bale Bag, BLACK |
|
|
|
|
Hay
Bale Bag, 1/2 bale size |
 Made in the USA by World Class Equine |
Store
and transport a 1/2 bale of hay with no mess
in the trailer tack room or car trunk.
This bag zips on three sides like a lid,
so you can fit it over a few flakes of hay, roll
it over & zip it up. Heavy-duty
construction & heavy-duty zipper are
extremely durable, and we think it is
the best-constructed hay bale bag
available. This size is also
ideal for protecting a saddle, show
clothes or other horse gear. Clean with
a water hose & hang to dry.
*24"D X 17"T X 24" L
*Color choices: blue, green, red,
grey & black
|
|
Hay
Bale Bag, 1/2 Bale size, Blue |
|
|
|
Hay
Bale Bag, 1/2 Bale size, Green |
|
|
|
Hay
Bale Bag, 1/2 Bale size, Red |
|
|
|
Hay
Bale Bag, 1/2 Bale size, Grey |
|
|
|
Hay
Bale Bag, 1/2 Bale size, BLACK |
|
|
|
|
Hay
Bale Bag, Roping |
 |
Store
and transport a bale of hay with no mess
in the trailer tack room or car trunk.
This bag zips on three sides like a lid,
so you can fit it over the hay bale, roll
it over & zip it up. Heavy-duty
construction & zipper. Holds a
two-string, 60 lb. bale of hay. This one
has a grommet on the top to add a steer
head for roping practice (or for
ventilation). Color: Tan
|
|
Hay
Bale Bag, Roping |
|
|
|
|
Trailer/RV
step, 14" |
 |
These portable
heavy-duty molded plastic steps are
designed to help you step safely into a
trailer tack room, living quarters or RV. Sturdy with a wide base.
Can also be used for
mounting a small horse. 14" tall,
with two 7" steps. *Available
in ash grey color only.
Lifetime
warranty by High Country Plastics
21"
L x 18 3/4" W x 14" H
+FOB:
charge in addition to regular shipping,
for a oversize or heavy box
|
|
Trailer/RV
steps, 14" / two steps |
|
|
|
|
19"
Tall Mounting Steps |
 |
These
steps can do double duty! Use as steps into your trailer
and also as an aid in mounting your horse. Sturdy,
with a wide base. Made of rugged plastic, with a
built-in handle for easy moving. 19" tall, with two
steps.
*Please
measure your trailer first if these are intended for
trailer steps.
26"L
X 15"W X 19"H
* SIX
color choices: black, purple, blue, red, tan or green.
Lifetime
warranty by High Country Plastics
+FOB:
charge in addition to regular
shipping, for a oversize or heavy box
|
|
19" Tall Mounting Steps - Black |
|
|
|
19" Tall Mounting Steps - Purple |
|
|
|
19" Tall Mounting Steps - Blue |
|
|
|
19" Tall Mounting Steps - Red |
|
|
|
19" Tall Mounting Steps - Tan |
|
|
|
|
|
19" Tall Mounting Steps - Green |
|
|
|
|
|
|
22"
Mounting Steps |
 |
A great aid for anyone to use when
mounting a horse. Saves the horse's back from getting
twisted.
Sturdy, with a wide base.
Made of rugged plastic, with a built-in handle for easy
moving.
22"
tall, with three steps. Super wide & sturdy.
31
1/4" L x 18" W x 22 1/2" H
* SIX color choices:
black, purple, blue, red, tan or green.
Lifetime
warranty by High Country Plastics
+FOB: charge in
addition to regular shipping, for a oversize or heavy
box
|
|
22" Tall Mounting Steps - Black |
|
|
|
22" Tall Mounting Steps - Purple |
|
|
|
22" Tall Mounting Steps - Blue |
|
|
|
22" Tall Mounting Steps - Red |
|
|
|
22" Tall Mounting Steps - Tan |
|
|
|
22" Tall Mounting Steps - Green |
|
|
|
|
|
|
Swing Out
Blanket Rack, 40" |
 |
Installs onto
vertical wall studs inside trailers. Folds
against the wall when not in use. Strong
powder-coated steel. Great for the barn or
tack room!
*measure carefully---this
is
a long blanket rack!
Screw centers on the bracket
are 5 3/4" apart. |
|
Swing Out Blanket Rack, 40" long |
|
|
|
|
42" Fold
Down Blanket Rack-OUT
OF STOCK UNTIL 6/15 |
 |
Blanket bar
that attaches easily to a wall. Can be
folded down when not in use. Multiples can
be installed. Brackets are 42" apart, and
should be attached to the studs of the
trailer wall. |
|
42" Fold Down Blanket Rack |
|
|
|
|
Folding
Wall-Mount Saddle Rack |
 |
Installs with carriage bolts or screws on the
vertical or horizontal trailer
wall studs. Or mount it on a sturdy board that is
fastened to the wall studs first. Folds down and out of the way until it's needed.
Designed built-up in front for trailers, so the
saddle won't fall off while traveling.
Install multiples in the tack room, too. Very sturdy--constructed of heavy-duty tubular metal,
gray color, and has a beautiful powder-coat finish.
Holes are drilled for mounting along the
top.
27"L
X 8"W X 7"H. |
|
Folding Wall Mount Saddle Rack |
|
|
|
|
Standing/Foldable Saddle Rack |
 |
Sturdy
enough to use as an extra saddle
saddle rack in the trailer, but may fall
over during rough driving if not secured.
It's better to store it folded until you need it to
hold your saddle outside the trailer. For
English or Western saddles, and has a
halter/bridle hook in front. Painted
tubular steel fastens at top with a nylon
strap, and the storage rack snaps together
at the bottom to hold brush boxes, boots,
etc. Black. 19"W
X 33"T X 26"L when
open.
+FOB:
charge in addition to flat-rate shipping, for a oversize or heavy box
|
|
Standing/Foldable Saddle Rack |
|
|
|
|
2 Wheel
Saddle Rack Cart |
 |
This new innovative design
allows easy transport of 2 saddles &
includes a basket for accessories.
The handle and
the saddle racks are adjustable.
It moves on 10"
pneumatic tires. When the attachments are removed it can also double
as a hay bale hauler.
Size:
28" L X 24" W x
52" H
Color:
Gray Hammer
Tone, Powder-Coated
+FOB:
charge in addition to flat-rate
shipping, for a oversize or heavy box
|
|
2 Wheel Saddle Rack Cart |
|
|
|
|
2
Tier Saddle Rack |
 |
The two tier saddle rack can
be mounted on a wall or hung on a wall with
a hook that is provided. The saddle
trees and basket can be adjusted for
different heights or can be removed
completely. These parts are
interchangeable with out saddle rack cart.
Assembly required.
Size:
40"tall X 14"
wide X 22" front to back
Color:
Gray Hammer
Tone Powder Coat
+FOB:
charge in addition to regular shipping, for
a oversize or heavy box
|
|
2 Tier Saddle Rack |
|
|
|
|
3 Tier
Saddle Rack |
 |
We are impressed with the
versatility of this sturdy saddle rack, but
is probably better for the barn than the
trailer. The saddle holders are shaped so
that the saddles may fall off in a moving
trailer, unless they are secured in some
way-(see the Rumber saddle rack upgrade, next item down). You would also want to fasten the base
to the floor if it is installed in a
trailer. Size:
30" L x
30" W x 68" H
Color: Gray
Hammer Tone Powder Coated
+FOB:
charge in addition to regular shipping, for
a oversize or heavy box
|
|
3 Tier Saddle Rack |
|
|
|
|
RUMBER
Saddle Rack |
*an example of
how to mount this saddle rack--the back of
the saddle rack has had a hole cut in it to
accommodate the shape of the pipe it is
mounted to
|
This heavy-duty molded plastic & rubber
composite saddle rack is actually
designed to upgrade any level saddle
rack (such as the 3-tier saddle rack
pictured in the product box directly
above this). This sturdy saddle rack is
hollow underneath, and it fastens over
any existing rack (metal or wood), so
that your saddle fits better and will
not slide off when the trailer is
moving. Install by drilling holes &
fastening to the saddle rack with the proper screws or
U-bolts (fasteners not included). The
back can easily be cut with a saw. Black.
1/8" thick material
overall
7" tall at
the front
3 1/4"
tall at the back
10 1/4" wide
overall
29 1/2" L.
There are no pre-drilled mounting holes,
as this rack will be custom-mounted
|
|
RUMBER
Saddle Rack |
|
|
|
|
RUMBER
Halter/Bridle Rack |
|
This heavy-duty halter or bridle rack is
useful
in the trailer or in your barn. Features 8 rounded hooks
slanted upward so items cannot slip off
while trailering. The heavy-duty molded
plastic & rubber composite rack
can easily be cut in 1/2 with a saw. Install with
screws or rivets (not included). Black. 4"H X 29 1/2" L.
No pre-drilled mounting holes
Made in the USA by
Rumber
Materials
|
|
RUMBER
Halter/Bridle Rack |
|
|
|
|
Halter/Bridle Rack,
4 Hook |
(fix2).JPG) |
This 4 Hook Bridle Rack
easily mounts to walls to keep tack
organized. It's heavy-duty metal and rust
resistant.
- Metal: Steel
- Color: Black
- Width: 19"
- Mounting holes: 18.5" apart
|
|
Halter Bridle Rack, 4 Hook |
|
|
|
|
Halter/Bridle Holder,
5 Hook |
 |
This 5 Hook Bridle Holder
keeps your bridles clean and shapely.
It features 5 crescent-shaped hangers made
from PVC-coated metal. We like this
rack for bridles because it has a nice curve
at the top of the hook and a lip from
keeping them from falling off in your
trailer.
- Metal: Steel
- Color: Black
- Width: 40"
- Holes: 4
|
|
Bridle Holder, 5 Hook |
|
|
|
|
Neoprene
Head Bumper |
 |
The Head Bumper is made of
shock-absorbent, high-impact foam encased in
neoprene. This is for maximum
protection. The item is suitable for
trailering or in the stall. The Head
Bumper easily attaches to any halter.
Color: Black |
|
Neoprene Head Bumper |
|
|
|
|
Folding
Portable Wheelbarrow |
 |
A
trailer, show and trail riding necessity!
Very sturdy and well made, it holds 4.5 cubic ft.
of material (up to 80lbs.) and can be easily cleaned
with a hose.
Lightweight tubular steel frame with
rust-inhibiting paint, green or blue PVC-coated canvas body,
6" all-terrain pneumatic tire. 37
1/2"H X 24"W when folded. Has a loop for
hanging on the wall in your trailer.
+FOB:
charge in addition to regular
flat-rate shipping, for a oversize or heavy box
|
|
Folding Portable
Wheelbarrow --green or blue
Sorry-NO
color
choice |
|
|
|
|
Portable
Tack Hangers |
|
 |
This is a heavy steel
tack
hanger. This multipurpose hanger can
be used for tack and is able to hang various
items. The Portable Tack Hanger fits
over any metal or wood stall with correct
width (1.75").
Metal: Steel
Color: Polished Metal
Fits: 1.75" Span/Board
|
|
Portable Tack Hanger, 4" |
|
|
|
Portable Tack Hanger, 8" |
|
|
|
|
Portable
Bucket Hook |
.jpg)
|
This is a heavy steel bucket
hook. It will ensure that your water
or feed bucket stays in place. The
Portable Bucket Hook fits over any metal or
wood stall with the correct width (2").
Metal: Steel
Color: Chrome
Size: 7" Tall
Fits: 2" Span/Board |
|
Portable Bucket Hook |
|
|
|
|
Small
Door Cabinet |
 |
The small door cabinet is
ideal for limited space and is very
lightweight. It includes 2 shelves for
aerosol cans and other items similar in size
along with a single-roll paper towel holder.
No bar to remove-simply bend the sides
outward and the paper towel roll will slide
on. (Display items not included.)
Constructed of
high-strength impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Measurements: 12"W x 23.3"
H x 4.8" D
Weight: 4.6 Lbs
Made in the USA by
Clear 1 Racing |
|
Small Door Cabinet |
|
|
|
|
Base
Door/Wall Cabinet |
 |
The base door/wall cabinet
weights only 9.5 pounds and includes 3
shelves to accommodate aerosol cans and
other items similar in size. Many of
your horse supplies and related items
will also fit great on this base door/wall
cabinet. (Display items not included.)
Constructed of
high-strength impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Measurements: 22.5"W x 32"
H x 4.5" D
Weight: 9.5 Lbs
Made in the USA by
Clear 1 Racing |
|
Base Door/Wall Cabinet |
|
|
|
|
Door/Wall
Cabinet W/2 Roll Paper Towel Holder |
 |
The base door/wall cabinet
weighs only 9.7 pounds and includes 3
shelves to accommodate aerosol cans and
other items similar in size along with a
double roll paper towel holder. No bar
to remove simply bend the sides outward and
the paper towel roll will slide on.
Many of
your horse supplies and related items
will also fit great in this cabinet.
(Display items not included.)
Constructed of
high-strength impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Measurements: 23"W x 37" H
x 4.5" D
Weight: 9.7 Lbs
Made in the USA by
Clear 1 Racing |
|
Door/Wall Cabinet W/2 Roll Paper Towel
Holder |
|
|
|
|
Door/Wall
Shelf W/Removable Trash Can |
.jpg) |
This combination shelf with
removable trash can is ideal on the trailer
door . Includes black plastic trash can.
Constructed of high-strength
impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Measurements: 28.5"W x 14" H x
17.5" D
Weight: 8.4 Lbs
Made in the USA by
Clear 1 Racing
|
|
Door/Wall Shelf W/Removable Trash Can |
|
|
|
|
Helmet
Bays |
 
Standard (Left) Deluxe (Right) |
These are great mounted high
on the tack room wall. Choose from 2 Helmet bays: standard bay with foam lining and apparel
hook or the deluxe bay with foam lining,
apparel hook and storage shelf for glasses, gloves, and other
riding accessories.
(Display items not included.)
Constructed of
high-strength impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Standard Measurements:
15.5"W
x 13" H x 13" D
5 Lbs
Deluxe Measurements:
15.5"W x 14" H x
13" D 7 Lbs
Made in the USA by
Clear 1 Racing |
|
Standard Helmet Bay |
|
|
|
Deluxe Helmet Bay |
|
|
|
|
"D" Cell
Flashlight Holder |
 |
Holds multi-length "D" cell
flashlights. Includes rubber grommet
for secure fit. Good for tack rooms in horse
trailers--mount it on the wall within reach
of the door, or in the barn.
(Flashlight not
included.)
Constructed of
high-strength impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Measurements 3.5"W x 7" H
x 4" D
Weight 0.4 Lbs
Made in the USA by
Clear 1 Racing |
|
"D" Cell Flashlight Holder |
|
|
|
|
Universal
Cord/Hose Hanger |
 |
Stores electrical cords or hoses for easy accessibility.
Constructed of
high-strength impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Measurements: 4.5"W x 5" H
x 4" D
Weight: 0.5Lbs
Made in the USA by
Clear 1 Racing |
|
Universal Cord/Hose Hanger |
|
|
|
|
Collapsible Chair Rack |
 |
Rack holds 3 collapsible
chairs. Closed bottom allows for wall
storage. Fits great in a trailer tack
room or barn. (Chairs not included.)
Constructed of
high-strength impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Measurements: 21.5"W x 4"
H x 6.5" D
Weight: 2 Lbs
Made in the USA by
Clear 1 Racing |
|
Collapsible Chair Rack |
|
|
|
|
Canopy
Straps (Pair) |
 |
Fully adjustable 2" straps
and wall-mounted bottom tray keeps your
10x10 or 10x20 collapsible canopy secure
during travel or stored in a barn.
(Canopy not included.)
Constructed of
high-strength impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Wall unit measurements: 11.5"W x
4.5" H x 1" D
Weight: 2 Lbs
Made in the USA by
Clear 1 Racing |
|
Canopy Straps (Pair) |
|
|
|
|
Cup
Holder |
 |
Great for RV's, trucks or
trailers. Holds 2 medium-size cups or
bottles.
Constructed of
high-strength impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Measurements: 8" x 3.5" H
x 4" D
Weight: 0.5 Lbs
Made in the USA by
Clear 1 Racing |
|
Cup Holder |
|
|
|
|
Paper
Towel Rack |
 |
The paper towel rack is small
enough to mount just about anywhere for easy
access. Can be mounted vertical or
horizontally. No bar to remove--simply
bend the sides outward and the paper towel
roll will slide on.
Constructed of
high-strength impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Measurements: 11.5"W x
4.5" H x 5" D
Weight: 0.5 Lbs
Made in the USA by
Clear 1 Racing |
|
Paper Towel Rack |
|
|
|
|
Propane
Tank Storage Racks |
 |
Safely stores propane tanks
for travel. Mounts securely to inside trailer floor,
against the wall. (It has no bottom).
Constructed of
high-strength impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Single Bay Measurements:
13"W x 11"H x 13" D
Weight: 2.5 Lbs
Double Bay Measurements:
26"W x 11"H x 13"D
Weight: 3.2 Lbs
Made in the USA by
Clear 1 Racing |
|
Single Bay Propane Tank Rack |
|
|
|
Double Bay Propane Tank Rack |
|
|
|
|
Aerosol
Can Shelves |
 |
Wall mounted lightweight
racks to keep your aerosol cans neat and at
your fingertips. Many of your horse
supplies and related items will also fit
great in this cabinet. Constructed of
high-strength impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
8 Can Measurement: 22"W x
4.5" H 3.5" D
Weight: 1.6Lbs
12 Can Measurement: 33"W x
4.5" H x 3.5" D
Weight: 2.2 Lbs
Made in the USA by
Clear 1 Racing |
|
8 Can Aerosol Can Shelf |
|
|
|
12 Can Aerosol Can Shelf |
|
|
|
|
Oil Quart
Racks |
 |
These are designed to be floor-mounted racks,
made to keep your
extra supply of oil neat and out of the way. Many
of your horse supplies and related items
will also fit great in this rack.
Constructed of high-strength
impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
6 Quart Measurement: 16"W
x 5.5" H x 5" D
Weight: 1.9 Lbs
12 Quart Measurement:30.5"W x 5.5"H x 5"D
Weight: 3.6 Lbs
Made in the USA by
Clear 1 Racing |
|
6 Quart Oil Quart Racks |
|
|
|
12 Quart Oil Quart Racks |
|
|
|
|
Jack Pads |
 |
These 12" x 12" jack pads are used for trailer tongue jacks, RV
leveling jacks and much more, each pad has a
20,000 lb. rating capacity and includes a
non-skid surface and nylon rope handle.
Constructed of
high-strength impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Measurement: 12" x 12"
Made in the USA by
Clear 1 Racing |
|
Jack Pad, Single |
|
|
|
Jack Pad, Pair |
|
|
|
|
Jack Pad
Pouch |
 |
The jack pad pouch stores up
to 2 pads and is designed for wall mounting
for easy access and out of the way storage. (Jack
pads sold separately, above.)
Constructed of high-strength
impact-resistant ABS material.
Black, self-tapping
mounting hardware included.
Measurements: 15"W x 8.5"
H x 2" D
Weight: 1.2 Lbs
Made in the USA by
Clear 1 Racing |
|
Jack Pad Pouch |
|
|
|
|
Shatterproof Mirror |
 |
Made from 1/8" High Impact
mirror grade plastic material.
Constructed of
high-strength impact-resistant ABS material.
NOT EXACTLY AS
PICTURED--JUST UPDATED! No screws to deal
with--mounts with 2 self-adhesive strips,
placed vertically on the back. Mount on a
flat surface.
Measurement: 9"W x 12" H x
.125" D
Weight: 0.3 Lbs
Made in the USA by
Clear 1 Racing |
|
Shatterproof Mirror |
|
|
|
|
English
Helmet Holder |
 |
The English Helmet Holder is
a great item to store your riding helmet up
out of the way of and preserve it's
condition.
Measurements: 12.5"L x 5.5"W
Screw Centers: 2.75" apart
vertically |
|
English Helmet Holder |
|
|
|
|
Trailer Ties,
Nylon Adjustable |
 |
These adjustable nylon web
trailer ties feature a 1" wide, double-sewn
nylon strap which has a safety release on
one end and a standard bull snap on the
other. Choose from two sizes: the lengths adjust from
21" to 30" or EXTRA LONG 27" to 42". |
|
Black Adjustable Trailer Tie, 21"- 30" |
|
|
|
Black Adjustable Trailer Tie, 27"- 42" |
|
|
|
|
Bungee
Stretch Trailer Tie |
 |
If a horse is fastened into the trailer
with this heavy stretchable trailer tie, he will have
some "play", and be able to stretch it twice it's length
if he gets into trouble, and still remain tied. It will
break if stretched 3 times it's length. It has a safety
release on one end and a standard bull snap on the
other. You decide which type of trailer tie you think is
best for your horse---stretchable or standard. Total
length: 30" |
|
Bungee Stretch Trailer Tie, 30" |
|
|
|
|
"Fix-it"
Halter Replacement Snap |
 |
Horses tend to catch their halter cheek snaps in the trailer
and break them. Carry a replacement snap like this in
your emergency parts kit. Simply remove the old snap, and install
this one in the remaining nylon loop. It features a
simple 1" screw-in attachment bar---no sewing!
|
|
"Fix-it" Snap
|
|
|
|
|
Lead Rope
Snaps |
 |
These 3" lead rope snaps
are an item you'll want to keep in your
emergency parts kit. They are strong, but
can break in an emergency, or get flung off
in the bushes. You can slip one on & tie a
knot in the rope or pair it with a rope
clamp (sold below) to repair a halter lead rope. |
|
Brass Lead Rope Snap |
|
|
|
Chrome Lead Rope Snap |
|
| | | |
